DL Tear Off RSVP Card - Semi Gloss White Lumina

DL Tear Off RSVP Invitation Card - Semi Gloss White Lumina

• The DL Tear Off RSVP Invitation Card is a unique card that is popular for brides wanting to save on the expense of a return RSVP envelope - the integrated tear off (perforated) RSVP is usually printed in a postcard format and guests can just complete, tear off and return.
• This DL Tear Off RSVP Invitation Card is made from one of the smoothest and brightest bleach boards available! It is a 315gsm card from Finland and has been finished with our stunning Lumina embossing. The embossed side is semi-gloss white and the reverse side is plain matte white. Bleach board is generally used for product packaging but also makes affordable invitation & greeting cards.
• Direction of pattern runs across the long edge of the unfolded DL Tear Off RSVP Invitation Card. If you require the pattern to run in the same direction as the short edge of the unfolded card, we can provide by special request for additional charge.
• This DIY Invitation Card arrives flat packed & unfolded making them easier to print. When folded they measure 21cm x 10.5cm and are commonly used in both portrait and landscaped formats.
• Tip : When working with scored cards, the bump on the score (or fold line) is always the inside. When ready to fold, place on clean flat surface with bumps facing up and gently fold the card over and align the corners. Whilst holding the corners together, gently flatten out the fold. For best results, make the fold sharp by rubbing gently with the back of a clean spoon.
• We use & recommend Helmar 450 Quick Dry Glue or Helmar Premium Craft Glue for gluing any inserts or decorative papers to the front panel. (sold separately)
• The invitation text and the postcard style RSVP are normally printed directly on the card. However, sometimes the invitation text is is printed on a paper insert. (sold separately)
• All of our DL Tear Off RSVP Invitation Cards fit into our standard DL Envelopes or our DL Invitation Boxes. Our folding cards are specifically designed to fit our standard envelopes & box sizes. (sold separately)
• This bleachboard paper is manufactured in Finland and is converted and packaged by Paperglitz in Sydney, Australia. This bleach board is light but rigid and is widely used by wedding stationers for bomboniere boxes and invitation boxes. It also also popular for chocolatiers and cake makers looking for safe packaging boxes.
• It is also widely used for Annual Reports, Brochures, Menus, Greeting Cards, Invitations and blister packaging, freezer & fridge and a wide range of general quality packaging.

Environmentally Conscious Product. It is made with paper that is :

• Food contact approved to FDA standards - great for packaging chocolates, cakes etc.
• Acid free (non-yellowing)
• Elemental Chlorine Free (ECF) Pulps & Process Chlorine Free (PCF)
• ISO 14001 EMS (Environmental Management Systems)
• Responsible Forestry Practices.

*Compatible is not a guarantee of performance on your specific printer. It has been tested to work with a wide range of such printers/toners but it always subject to machine type and specification. It also refers to the paper used to make this product and not the product itself, as sizes and shapes accepted by each printer is different. Prior testing is recommended.

Larger sheets sizes such as A3, SRA3, 650x910mm, 720x1020mm are also available. We can also guillotine to size and/or die cut to your specification. Contact us with your requirements for a quotation.

We also carry this card in 315gsm Card stock, boxes & a wide range of die cut DIY invitation cards.

Buy with confidence and specify only "Genuine Paperglitz DL Tear Off RSVP Invitation Cards" for your next project.